The ES2000 series electric strikes are fully monitored high
security products manufactured from stainless steel and designed
for use with all access control systems. The strikes are suitable
for use with hinged doors which require either fire or security
control as part of a building management system.
These strikes are flexible and can be changed from fail safe to
fail secure, mounted on the left or right hand side of the door and
are available in 12Vdc.
They offer a strong, dependable and long-lasting electric strike
solution with a 850kg holding force and endurance rating of 1
million cycles.
Key Features
- Fully monitored - strike locked and door latched
- Fail safe/fail secure changeable on site
- High security
- 4 Hour fire rating
- 850kg holding force
- 1 million cycles endurance rating
- Cast stainless steel body
- Stainless steel locking pins
- SCEC Endorsed
- Low Current consumption - Max 175ma @12Vdc
- Solenoid rated for continuous use
- Mounting kit supplied as standard
- TRICARE® 5 Year Warranty
Applications
- High traffic areas
- Fire rated door sets
- Open in/open out doors
- Suitable for use with all access control systems
Standards and Compliance
- S3 (Security) Australian Lock Standard (AS4145.2.1993)
- D3 (Durability) Australian Lock Standard (AS4145.2.1993)
- BS 5872 Approved
- Successfully fire rated up to 4hrs on fire door assemblies in
accordance with AS1905.1.2005 (Part 1: Fire resistant door
sets)
- Approved to UL1034 (highest level)
- CE Approved
- C-Tick Certified
- SCEC endorsed for secure areas
Voltage
12Vdc
Current
175 mA @ 12Vdc
Solenoids
Solenoids are rated for continuous use
Monitoring
Solenoid Monitor - 1 amp NO/NC microswitch
Door/Latch Monitor - 1 amp NO/NC microswitch
Holding Force
850kg Static Strength Rating
Endurance
Cycle tested to 1,000,000 operations
Latch
Suitable for 15mm latch bolt with 3mm door gap
Environment
Operational temperature range - 20°C to +60°C
Body
Solid Stainless Steel Construction
Keeper
Stainless Steel
Specification Statement
The strike should be constructed of solid stainless steel, have a
minimum holding force of 850kg and have an endurance rating of 1
million cycles. Monitoring must include independent door / latch
& solenoid monitoring. The one strike must be changeable from
fail safe to fail secure on site where required. The strike should
not consume current greater than 175mA at 12Vdc and have a solenoid
rated for continuous use. Certifications must include CE, C-Tick
and 4 hr fire rating.
_________________________________________________________
Ordering Information
102001-000
12V Fail Safe Electric Strike
102002-000
12V Fail Secure Electric Strike
Accessories
210100-541
13mm Rebate Plate
220200-519
Mounting Kit
Note: If Extension Lips are required, use ES2100 Electric
Strike (Refer to catalogue)